4PK TN324 Toner Cartridge For Konica Minolta Bizhub C258 C308 C368 Printer
Are a factory specializing in the research and production of copier toner for more than 10 years. Our technology has been far ahead, and we have conquered chip compatibility, toner setting rate, particle size and resolution. So that your copier (printer) can use our products perfectly. In terms of price and product quality, We always uphold to enable more people around the world. The fourth generation of toner: the fine toner is very important, the more delicate the powder, the stronger the adhesion ability, under the microscope, other people's toner is irregular shape and size, and our toner is presented in the shape of a ball.
Our advantage is not to harm the machine, in the printing process, not to waste too much powder, and has super stability. Use LEDES compatible cartridges to print photos, high-quality printing performance to ensure the color long-lasting, to keep each precious memory intact and forever. LEDES cartridges are equipped with intelligent chips, and have undergone strict quality testing to ensure that they are better compatible with your printer and make printing easy. Environmentally friendly materials: LEDES is committed to producing environmentally friendly office products. Work perfectly with Konica Minolta Bizhub C258 C308 C368 Printer. : Yield up to 28,000 (TN324 Black Toner) and 26,000 (TN324 Color Toner) pages Based on 5% coverage (Letter/A4). For Konica Minolta TN324, for Bizhub C258 C308 C368 Printer. So how to judge the quality of toner? Mainly from the following aspects?? The size and distribution of particles. The particle size and distribution of toner directly affects the performance of toner. Good powder particle size is generally in the range of 7-10 microns, and the distribution is also concentrated in these particles. The poor powder particle size is generally 10-14 microns, the distribution is also very wide and not concentrated, such a particle size will cause poor stability of toner, poor resolution, fixed shadow is not firm. Printers are used in the office. And the average blackness value is generally around 1.48. Of course, the higher the blackness value, the better, a certain amount of toner. Under a certain average coverage. The number of printed pages will be relatively reduced, which will increase the cost. The reasons affecting the bottom ash value are mainly related to the conductive characteristics (referred to as electrical). Of the toner and the particle size of the toner. The stronger the conductivity and the finer the particles. The easier it is to produce bottom ash. Under normal circumstances, the base ash value of toner is about 0.050.06. The waste powder rate refers to the proportion of waste powder produced by a certain amount of toner in normal printing. The waste powder rate also directly affects the number of pages printed by a certain amount of toner. The standard waste powder rate is generally 5%-7%, and the poor powder waste powder rate is generally 10%-15% or even more. Fixation refers to the ability of toner adhering to the surface of the paper to melt and penetrate into the paper fibers.The melting index of the toner determines the fixing firmness of the toner. A toner with a low melting point will be firmer, while a toner with a high melting point will be more difficult to fix, and sometimes cause a fixer roller. The melting point of the new low-temperature toner is controlled between 100 degrees and 140 degrees, which is suitable for the fixing temperature of the equipment.
The thickness of the toner particles will directly affect the resolution, and you can print small print with more strokes to visually check whether it is blurry to judge its high or low resolution. The resolution of toner is mainly 300dpi, 600dpi, 1200dip.
The higher the resolution of the printer or copier, the higher the process requirements for toner particles.